Secondary banner
 
All residence hall rooms are furnished with a bed frame, mattress, desk, chair, and closet or wardrobe per student. All furniture must stay in your room. Removing any furniture from your room may result in a charge. Beds in residence halls are capable of being bunked. Please find the dimensions of our two bed sizes by clicking the thumbnails below. Visit our Standard Room Furnishings page for more detailed information of what's provided in each residential community.
 

Contact the Housing Facilities Call Center at (251) 460-7655 to request bed-bunking service or to report any damages to furniture.

extra long twin bed
Extra-Long Twin Size Bed
full size bed
Full Size Bed

 

How to Change the Height of Your Bed

You will need:

  • Rubber mallet
  • One friend

_____________________

  1. Take the mattress off your bed.
  2. To loosen the bed platform from the headboards take the rubber mallet and tap up, under each corner of the bed platform where it is attached to the bed post.
  3. Repeat #2 to work all four corners loose.
  4. When corners are loose, with your friend at one end of bed and you at the other end, place your hands on bed platform in between the posts, lift and release bed platform hook plate from headboard channel pin.
  5. Determine rung height desired and place hook plate into headboard channel one side at a time. It helps to tilt headboard at slight angle to ease each hook plate into desired channel pin.
  6. With rubber mallet tap each corner of bed frame into "locked position".
  7. Contact the Housing Maintenance Call Center with any questions or concerns about this process.